DIY Installation of Self-Adhesive Textured Mold-Proof Wallpaper
Self-adhesive textured mold-proof wallpaper is widely popular due to its easy installation. Here are some steps and tips for DIY installation.

1. Prepare Tools and Materials
For installing self-adhesive wallpaper, you need some basic tools such as a utility knife, squeegee, tape measure, and pencil. Also, ensure that the walls are clean and dry.

2. Measure and Cut
First, measure the height and width of the walls and cut the wallpaper according to the dimensions. To ensure alignment, use a pencil to mark reference lines on the wall.

3. Peel Off the Protective Paper
Carefully peel off the protective paper on the back of the wallpaper. Do not peel off all the protective paper at once to avoid the wallpaper sticking together.

4. Stick the Wallpaper
Slowly stick the wallpaper from top to bottom, using a squeegee to gently press it to ensure it is smooth and bubble-free. If bubbles appear, use a needle to gently puncture them and then press flat with the squeegee.

5. Trim the Excess
After sticking, use a utility knife to trim the excess wallpaper edges to ensure that the wallpaper fits snugly against the wall.