Installation instruction for glass sticker
1.ruler 2. clean duster cloth 3.paper knife 4. Scraper
Step 1:Measure the height and width of the glass surface, allow approximately 1 to 2cm extra material on each side of the film when cutting
Step 2: Cealn galss to be used, create your own wetting soltion by diluting a few drops of very mild detergent in 1 liter of water. Apply a generous amount of the wetting solution to the glass
Step 3. Make sure window pattern film is properly aligned with the window, when the top portion is smooth and the positioning is perfect, carefully peel the backing paper off and press the film against the window
Step 4. Use the plastic scraper and work from the center out to the edges to remove any air bubbles and wetting solution.